CGC Synko® Brand Lite Finish™ Drywall Compound

CGC Synko Lite Finish™ is a professional-grade, ready-mixed drywall compound designed for the second and third coats in drywall finishing. Lightweight and easy to sand, it’s ideal for topping and filling over embedded joint tape, corner bead, trims, and fasteners. This compound delivers a smooth finish with less shrinkage and excellent crack resistance.

Key Features:

• Lightweight Formula – Easier to apply and sand, reducing fatigue and cleanup time.
• Low Shrinkage – Helps maintain a smooth, even surface with fewer coats.
• GREENGUARD Gold Certified – Meets strict standards for low VOC emissions and indoor air quality.
• Professional Finish – Ideal for fill and finish coats over paper-faced metal corner bead and trim.
• Ready-Mixed Convenience – No mixing required; just open, apply, and finish.

Application Notes:

• Not for embedding joint tape or skim coating.
• Store between 13–35°C (55–95°F) and remix before use.
• Thin with clean water in small increments if needed.
• Do not mix with other materials.
• Use setting-type compound for fiberglass mesh tape.

Whether you're finishing drywall joints or smoothing over trims, CGC Synko Lite Finish™ delivers a clean, professional result with less effort.

CGC Synko Lite Finish™ is a professional-grade, ready-mixed drywall compound designed for the second and third coats in drywall finishing. Lightweight and easy to sand, it’s ideal for topping and filling over embedded joint tape, corner bead, trims, and fasteners. This compound delivers a smooth finish with less shrinkage and excellent crack resistance.

Key Features:

• Lightweight Formula – Easier to apply and sand, reducing fatigue and cleanup time.
• Low Shrinkage – Helps maintain a smooth, even surface with fewer coats.
• GREENGUARD Gold Certified – Meets strict standards for low VOC emissions and indoor air quality.
• Professional Finish – Ideal for fill and finish coats over paper-faced metal corner bead and trim.
• Ready-Mixed Convenience – No mixing required; just open, apply, and finish.

Application Notes:

• Not for embedding joint tape or skim coating.
• Store between 13–35°C (55–95°F) and remix before use.
• Thin with clean water in small increments if needed.
• Do not mix with other materials.
• Use setting-type compound for fiberglass mesh tape.

Whether you're finishing drywall joints or smoothing over trims, CGC Synko Lite Finish™ delivers a clean, professional result with less effort.